|
Request A Quote
Home
Current Stock
Manuals
The Graveyard
Terms & Conditions
| |
| The ICOM R9000 is an all-mode, wideband receiver that
continuously covers a frequency range of 100 kHz to 1999.8 MHz. The most
visible of the radio's many advanced features is the built-in
multifunction 5 inch CRT display. Receive frequencies, modes and
additional useful data are displayed for your operating convenience. The
CRT functions as a spectrum scope to show you, at a glance, the relative
signal strengths of nearby receive frequencies. The span of the spectrum
scope can be selected for ±25, ±50 or ±100 kHz according to your needs.
The screen can also display the contents of 10 memories at once, and can
be scrolled to display other memories. The CRT can also be used as a
display device to monitor RTTY or packet via an ASCII RS-232 input port
(external data converter required). The R9000 boasts a total of 1000
memories (ten banks of 100) store frequencies, mode, filter width and
tuning step increments. You can use different memory banks according to
station type, frequency ranges or whatever your preference. By using the
memory list screen, many more convenient functions are provided: up to
eight character notes for your reference; and the advanced super
convenient memory editor function easily moves, copies and deletes the
memory contents. Tuning steps: 10 Hz, 100 Hz, 1 kHz, 5 kHz, 9 kHz, 10
kHz, 12.5 kHz, 20 kHz, 25 kHz and 100 kHz. The R9000 has seven different
scan modes with adjust scan speeds up to 13 channels/sec. Program Scan
scans between pre-programmed scan edges. Memory Scan scans memory
channels. Selected Number Memory Scan scans memory channels with the
same programmed mode. Priority Scan monitors specified memory channels.
DF Scan scans around the receiving frequency. Auto Memory Write Scan
programs receive frequencies into memory channels (900-999) during
programmed scan. The R9000 also provides versatile scan resume functions
when a signal is received: the scan cancels, pauses until a signal
disappears, pauses for an adjustable time, or pauses for the mixed
conditions of signal activity and time. The Voice Scan Control systems
allows you to skip inconvenient signals such as signals with no
modulation, heterodynes or noise.
Superior interference rejection is achieved with both IF shift and
notch filters. Control features include dual clocks with two kinds of
sleep timers and five independent daily timers. Noise reduction is
accomplished with a wide-narrow noise blanker. This radio even has
seperate Bass and Treble controls. The squelch can operate by meter or
noise level. A keypad is provided for rapid frequency entry. Rack
mounting handles are included. There are plenty of input and output
jacks on the rear panel including: DC Out, Ext. Spkr., Record Remote,
Speech Out, Line Out, IF (10.7 MHz) Out, Video In/Out, Data In, Acc.,
plus four antenna jacks.
| Specifications |
Frequency Range ....... 0.1-1999.8 MHz
Power ................. 110-120 VAC/240V
Antenna Impedance ..... 50 ohm unbalanced
Selectivity (-6dB) .... AM 6.0 kHz
FM-N 15 kHz
FM-W 150 kHz
SSB/CW 2.4 kHz
Sensitivity ........... .16 µV 1.6-30 MHz
.32 µV 30-999 MHz
.63 µV 1000-1239 MHz
.32 µV 1240-1300 MHz
.63 µV 1300-1600 MHz
1.0 µV 1600-1998 MHz
SSB (10 dB S/N)
Antenna Jacks.......... .1-30 MHz SO-239
.1-30 MHz RCA (HF Antenna Two)
30-1000 MHz N
1000-1999 MHz N
Audio Output .......... 2.5 Watts 4 - 8 Ohms.
Dimensions ............ 16.8 x 6 x 14.375 inches
Weight ................ 44.2 Lbs. (20 kg)
Price...................£1250.00
|
|
|
